Yes.

Allright I ran the search and got no results D:

And for changing the results address, how and why would I do that? Last, to convert the value to hex would i just add a 0x to the front of the value?

Yes.

Ok, but I still have NO results, and I don't know why or how to change the address to "005971F0"..

I have broodwar selected, im searching for an integer, value of 123456.. What am I missing?

I have no clue. I have never tested/attempted to test this. Wait until FaRTy gets online or someone who knows what they are doing.

Search for a simpler value like 1234. Then modify one of the results address.

Allright, so I've found a 4byte integer.. from here what do I do?

I have the map I want loaded into starcraft, and I have the unit I want selected. The unit was created in the editor, so it has always been there.

Meh forget about searching that value, it's actually easier this way:

- Open BW load your map and select the unit that you wish.
- Open artmoney and choose SC Broodwar from the processes list.
- Click on the menu Process, the option Memory Editor.
- In the cell view part select "Integer 4 bytes".
- In the table click on the first cell under "Address" and write 005971F0.
- The value next to it (the one under "01") is the value you're searching for. That's the address to the unitnode of the selected unit. Note it down somewhere.
- If you want you can get into BW, select another unit, then alt+tab, wait until the value refreshes and note the new value down (in case you want to search the addresses for more units).

Post has been edited 2 time(s), last time on Jul 6 2008, 1:03 am by Clokr_.

Allright thx Clockr, I have 0x60CC20 , 0x617420 for my values. Using EUD trig to create a selection detecting trigger, what do I do from here?

Im sry I have so many questions
This is all new for me.

So what exactly effects the outcome of the address?

I'm pretty sure it is:

-Units position
-Unit creation number
-Who selects the unit (duh)
-Who owns the unit (duh)
-MOAR?

Well I'm not retarded, just inexperienced. But I dont know what to do with my address and EUD trig except that the address goes into the mem offset?

Download farty's program (he posted a link in this thread). Then use it to convert the address doodle posted (also in this thread) into a DC. The you have to compare that DC to 0x60CC20 or 0x617420 to check if the unit is selected. I think farty's program can automatically export the triggers for you with the comparisons already done.

I wasn't calling anyone a retard... I was simply implying that I already knew that the two facts with the (duh) stamp were things that I already knew, thats all.

I've had farty's program for a few days now, but I don't know what to do with my 2 addresses, or how to convert doodle's address into a DC, or how to compare the 2 addresses. But yes, EUD trig does that for you and exprts it to a .trg or shows you the trig in a starforge text line. I just don't know how to use EUD trig to do any of this D:

How To Do It:
-First download both of the editors with the links provided below.
-Open up Scmdraft 2 and then open your map followed by opening up the trigger editor. (Classic/Text)
-Make fake triggers (below)
-Now save the map.
-Then open up your StarForge folder ~"C:\Program Files\Star Forge\Data"
-Next open up the "Conditions" file by right clicking on it and modify it with a text editor. (Notepad++)
-Then modify the Deaths Condition triggers so that you can input a number instead of a units name. (Text underneath links)
-Now save the text file and open up StarForge.
-Then open up the triggers and go to the EUD triggers section
-Replace the "0" 's with the number that follows the UnitID:"xxxxx" (the "x"'s only)
-Now once all of the conditions are replaced save the map and ENJOY!

Downloads:

Scmdraft 2
StarForge

Fake Triggers:

When I make EUD triggers I get all of the information into a trigger that I need to without inputing the Extended Unit.

This means that I input the correct player, correct value, and correct comparison to which I want to have an EUD trigger function on.

After this is done, I simply open up the unit box for the Death Condition and then choose a Terran Marine. I do this because in StarForge, a Terran Marine is a "0" (UnitID: 0) and its easy to copy and paste the number over top of it.

Text:

This is what it should look like when you open it. ~Line 76-78

This is what you need it to look like for it to work properly.

Please note:

The bold underlined text is what you need to have. It went from "Unit Unit)" to "Number Unit)

Of the player selections/unitnode entries?

-Units position - Has to do with the next. Editors handle it differently.
-Unit creation number - There really isn't a number, but unit creation definitely does.
-Who selects the unit (duh) - Selecting a unit doesn't change the address. If you find a value for a unit selection, it will work in any of the player selection groups.
-Who owns the unit (duh) - This is defined in what the selection groups point to... It is completely irrelevant to the unitnode entry.
-MOAR? = When SC loads the unit (including trigger creation.)

Well apparently I didn't know much about what I was talking about.

Unitnode pointers are a mess.

I would like to use them in my map but I don't know what to even look for.

Allright, well I've messed around a bit and I was able to create some flawed triggers that don't do much at all with EUD's.

I think farty, or anyone else who knows how, should set up a step by step tutorial on this subject with screenshots showing how to do what, starting with downloading artmoney and ending with the finished product of a working selection detecting trigger.

Then using the tutorial we could all create our own to fit our custom needs ^.^